Quick Answer
Purifico builds four lines of ozone water treatment systems. The S Series is a cabinet unit with a wet end, sized from 40 to 320 g/h. The SC Series adds an onboard compressor for sites without a separate air supply. The HV Series covers high volume operations, and the M Series is a modular system for large or remote installations. All four run the same core controls: Siemens PLC with touchscreen, ORP control, ambient ozone sensor with automatic shutdown, and Modbus, PRIVA, and in the ZONE remote monitoring.
| Ozone | 0 – 40g/h @ 10% concentration |
| Oxygen | 5Lpm, 93% dry oxygen |
| Dimensions | 27.5”W x 75.5”H x 58”D |
| Voltage | 220V, 1PH, 60Hz, 10 A |
| Ozone | 80g/h @ 10% w/w |
| Oxygen | 10Lpm, 93% dry oxygen |
| Dimensions | 27.5”W x 75.5”H x 58”D |
| Voltage | 220 V, 1PH, 60Hz, 12.5 A |
| Ozone | 160g/h @ 10% w/w |
| Oxygen | 20Lpm, 93% dry oxygen |
| Dimensions | 27.5”W x 75.5”H x 58”D |
| Voltage | 220 V, 1PH, 60Hz, 17.5 A |
| Ozone | 320g/h @ 10% w/w |
| Oxygen | 40Lpm, 93% dry oxygen |
| Dimensions | 27.5”W x 75.5”H x 58”D |
| Voltage | 220 V, 1PH, 60Hz, 35 A |
| 40S | 80S | 160S | 320S | |
|---|---|---|---|---|
|
Ozone |
0 – 40gph @ 10% concentration |
0 – 80gph @ up to 15% concentration
|
0 – 160gph @ up to 15% concentration |
0 – 320gph @ up to 15% concentration
|
|
Oxygen |
5Lpm, 93% dry oxygen
|
10Lpm, 93% dry oxygen
|
20Lpm, 93% dry oxygen
|
30Lpm, 93% dry oxygen
|
|
Dimensions |
24”W x 70.5”H x 16”D |
24”W x 70.5”H x 16”D |
28”W x 74.5”H x 20”D |
28”W x 74.5”H x 20”D |
|
Voltage |
220V – 50/60Hz, 1PH – 5AMP |
220V – 50/60Hz, 1PH – 10AMP |
220V – 50/60Hz, 1PH – 20AMP |
220V – 50/60Hz, 1PH – 30AMP |
| Ozone | 0 – 40gph @ 10% concentration |
| Oxygen | 5Lpm, 93% dry oxygen |
| Dimensions | 24”W x 70.5”H x 16”D |
| Voltage | 220V – 50/60Hz, 1PH – 5AMP |
| Ozone | 0 – 80gph @ up to 15% concentration |
| Oxygen | 10Lpm, 93% dry oxygen |
| Dimensions | 24”W x 70.5”H x 16”D |
| Voltage | 220V – 50/60Hz, 1PH – 10AMP |
| Ozone | 0 – 160gph @ up to 15% concentration |
| Oxygen | 20Lpm, 93% dry oxygen |
| Dimensions | 28”W x 74.5”H x 20”D |
| Voltage | 220V – 50/60Hz, 1PH – 20AMP |
| Ozone | 0 – 320gph @ up to 15% concentration |
| Oxygen | 30Lpm, 93% dry oxygen |
| Dimensions | 28”W x 74.5”H x 20”D |
| Voltage | 220V – 50/60Hz, 1PH – 30AMP |
Sizing starts with water volume, organic load, and how the water is used, not with the size of the building. The table below is the short version of how the four lines differ. Every unit shares the same control platform, so the decision is about output, air supply, and installation format.
| System | Format | Ozone output | Typical fit |
|---|---|---|---|
| S Series | Cabinet with wet-end injection | 40 to 320g/h | Greenhouses, farms, irrigation and holding tanks |
| SC Series | Cabinet with onboard compressor and wet end | 40 to 120g/h | Sites without a separate compressed air supply |
| HV Series | High volume skid system | 600 - 1,200g/h for large flows | Municipal, wastewater, and large industrial duty |
| M Series | Modular turnkey system | Built to project spec | Large, remote, or fast-deploy installations |
Siemens LOGO-8 PLC with a color touchscreen, ORP controller for treatment output, safety vacuum and pressure switches with gauges, a thermostatically controlled enclosure, and a BH-60 adjustable ambient ozone sensor tied to automatic shutdown. Systems are Modbus and PRIVA capable and ship ready for in the ZONE remote monitoring.
A nanobubble generator at 40, 80, 120, or 240 gpm, a residual ozone sensor alongside the standard ORP sensor, a remote ATI sensor upgrade, and recirculation injection pump options from 1.5 to 5.0 hp.
Output is calculated from water volume, turnover rate, organic load, and the treatment goal. Disinfection of clean source water needs far less ozone per liter than treating recycled water with a heavy organic load. Purifico runs a water analysis before specifying a system.
Both are cabinet systems in the same output range. The SC Series includes an onboard compressor, so it suits sites that do not have a compressed air supply to feed the oxygen concentrator. The S Series expects that supply to exist.
When there is no suitable indoor space, when the site is remote, or when the operation wants a turnkey unit that arrives ready to connect. Modular systems also simplify permitting and relocation on some projects.
No. The systems run oxygen concentrators that produce roughly 93 percent dry oxygen on site, at flow rates matched to the ozone output of each model. There are no cylinders to deliver or swap.
Yes. Every system is built for in the ZONE, Purifico's remote monitoring and management platform, and is also Modbus and PRIVA capable for sites that run their own control system.
Routine work is filter changes on the enclosure fans, periodic inspection of the reaction cell and concentrator, and sensor calibration. ORP trends in the monitoring platform flag most issues before they affect treatment.
| Organization | Reference |
|---|---|
| International Ozone Association | Ozone generation, sizing, and system design guidance |
| Health Canada | Guidelines for Canadian Drinking Water Quality |
| Canadian Centre for Occupational Health and Safety | Ozone: ambient monitoring and exposure control |
| Food and Agriculture Organization of the United Nations | Water Quality for Agriculture, Irrigation and Drainage Paper 29 |
